Table fume hood

Table fume hood

Description

Material description (all steel structure) Specification size: 1200 * 800 * 1500 (length * width * height) 1500 * 800 * 1500 (length * width * height) 1800 * 800 * 1500 (length * width * height) Housing: optional

Table fume hood material description (all steel structure)

Specification size: 1200 * 800 * 1500 (length * width * height) 1500 * 800 * 1500 (length * width * height) 1800 * 800 * 1500 (length * width * height)

Shell: made of steel plate with a thickness of 1.0mm or more by stamping, and the surface is coated with acid and alkali resistant EPOXY powder paint

Inner shell: Made of imported acid and alkali resistant and high temperature resistant special plate. Lighting: 30W fluorescent lamp, SUS304 stainless steel, 5mm frosted glass.

Airflow board: 6mm thick anti-folding special board is used for electrostatic spraying with epoxy resin. The orientation and angle of the device need to make the exhaust gas distribution uniform and no dead angles. Under standard conditions, the airflow share of the air outlet above, middle and lower of the air guide plate. Each of them is about 50 ± 10% to ensure that the gases with different specific gravity can be effectively removed. In addition, it has a manual adjustable air volume share design, which can increase the air volume share of the middle and lower air outlets to more than 80%.

Window: Use 6mm thick tempered riot glass. The internal pituitary balance device is used to stay at any position.

The size of the air outlet of the fume hood: Φ250mm or 250 * 250mm needs to be connected with the laboratory ventilation system, or a fan and pipeline must be installed separately.


[[Content_2_Product]]
[[ProInfoAttach]]
[[ProDetailSubTitle2]]

Related News

Product Recommended

  • Drip rack
  • Atomic absorption hood
  • Compound eyewash
  • Universal exhaust hood
  • Eye wash station
  • Wall eyewash