PP fume hood fume hood

PP fume hood fume hood

Description

Note: The above is included as standard. The size of the fume hood can be customized according to customer needs. Fume hood, fume hood operation table: Ventilation counter surface is usually made of the same color and same quality as the cabinet body. It can be replaced by solid core physical and chemical board according to customer needs.

Fume hood, fume hood operation countertop: The ventilation countertop is usually made of the same color and same quality as the cabinet body. It can be replaced by solid core physical and chemical board, Dutch Trespa, phenolic resin composite veneer countertop, and epoxy resin countertop according to customer needs Ceramic countertops

Ventilation cabinet : a large number of "mouth" type, "U" type and "T" type reinforced structures are used, the physical structure is stable, and the load can be 300KG, which is much higher than similar products of other brands;

Glass window: 5mm thick tempered glass is used, which has greater strength and good bending resistance, and small fragments with sharp angles will not occur when it is broken;

Sockets: Each fume hood is equipped with four 220V single-port multi-purpose sockets. (Other types of sockets can be added according to customer's actual application requirements) A laboratory-specific PP anti-corrosion waterproof cover is added;

Baffle: Welding and manufacturing with new 8.0mmPP polypropylene plate, which has strong resistance to acid and alkali and corrosion. It is installed behind and above the working space and consists of at least three plates, making the working space and the exhaust pipe An air chamber is formed between the connection points to discharge the polluted gas evenly. The deflector uses a deflector to combine it with the cabinet, which can be disassembled repeatedly.

Air collecting hood: It is made of PP and has strong corrosion resistance. The bottom entrance is a rectangular opening and the top exit is a circular opening.

Fluorescent lamp: Choose one 30W tri-proof lamp, which can waterproof, anti-corrosion and anti-oxidation;

Window sliding door: The movable straight window sliding door is placed between the work space and the operator to protect the operator's safety. Combined with the balanced position, the window sliding door can be stopped at any active point; the vision can be completely clear and unobstructed;

Window frame: Use frameless door, which is embedded with glass four-sided folder, with low friction resistance to ensure the safety and durability of the window;

Window suspension cable: Synchronous structure is selected; the transmission of the synchronous belt is accurate, the force on the shaft is small, the structure is compact, oil resistance, good wear resistance, and good aging resistance;

Control panel: LCD control panel is selected, which is equipped with power, switch, lighting, fan, and operation indicator buttons. The LCD display can clearly show the operating status of the fume hood;

Lower cabinet: We use new 8.0mmPP polypropylene plate to weld and manufacture. After engraving and bending, the whole cabinet is formed. It has strong acid and alkali resistance and corrosion resistance. The door panel adopts the double-folded structure, which is firm and solid, not easy to deform, and overall beautiful.

Handle: Use PP bridge handle special for laboratory, with strong corrosion resistance;

Hinges: Use laboratory-specific PP hinges with strong corrosion resistance.

Optional accessories:

Laboratory water tank: The PP cup tank is made of high-density PP. It is resistant to strong corrosion, has filtering and odor blocking functions, and the water storage elbow is made of high-density PP to prevent siphoning.

Water supply test: Use wall-mounted remote water valve and nozzle, the main body is thick copper, the appearance is high-brightness epoxy resin coating, corrosion resistance, heat resistance; ceramic valve core, 90 ° rotation, using the life switch 500,000 times , Static zui high pressure resistance 20 bar; switch knob is made of high density PP, fits ergonomic design, feels comfortable

Gas supply test: Use wall-mounted remote control valve and air nozzle, the body is thick copper, the exterior is high-brightness epoxy resin coating, corrosion-resistant and heat-resistant; the switch knob is made of high-density PP, which fits the ergonomic design Feel comfortable.

Installation and maintenance: The fume hood is equipped with flush-mounted external / internal duct access panels and modular electrical components for simple installation and maintenance.

Reasonable design: The inner deflector is installed to fit the fluid mechanics and ensure that the exhaust gas does not leak.

Note: The above is included as standard. The size of the fume hood can be customized according to customer needs.


[[Content_2_Product]]
[[ProInfoAttach]]
[[ProDetailSubTitle2]]

Related News

Product Recommended

  • Drip rack
  • Atomic absorption hood
  • Compound eyewash
  • Universal exhaust hood
  • Eye wash station
  • Wall eyewash